Advanced-control-technologies Specs Instructions ZDP100 (RF CONTROLLED, 300W, 12 Manual do Utilizador descarregar pdf

ZDP100 Instructions, Release 2.0

090805

HomePro

by ADVANCED CONTROL TECHNOLOGIES, INC.

0677-01

Radio Frequency Controlled, 300W, 120 VAC,

Plug-In Lamp Module, Release 2.0

ZDP100

HomePro

RF Home Automation

Button functions

1. Adds module under the command of Wireless Controller.

2. Local ON and OFF (push and release).

3. Local dimming (hold down).

ZDP100 PLUG-IN LAMP MODULE

The ZDP100 plug-in Lamp Module is a component of the HomePro lighting control system. Plug the Lamp Module

into a wall outlet and plug a lamp into the Lamp Module. Inclusion of the Lamp Module on the ZTH100 Wireless

Controller menu allows remote ON/OFF control and dimming of lamps connected.

This plug-in Lamp Module is designed to work with other Z-Wave enabled devices. Z-Wave nodes of other types can

be added to the system and will also act as repeaters if they support this function of repeating the signal received to

other modules in the system.

As part of a Z-Wave network, the ZDP100 can act as a wireless repeater to insure that commands intended for another

device in the network are received. This is useful when the device would otherwise be out of the radio range of the

wireless controller.

INSTALLATION

Plug this Lamp Module into the wall outlet near the lamp to be controlled, and plug the lamp into the Lamp Module.

See the ZTH100 or other Wireless Controller operating instructions to add this module under the command of the

Wireless Controller. Make sure the lamp(s) to be controlled total no more than 300 watts. WARNING: Plugging a

non-resistive load such as florescent lighting or a device with a motor may result in damage to the Lamp Module and

will void the warranty.

BASIC OPERATION

Local Control

The button on the ZDP100 allows the user to

• Turn on or off or dim and brighten the load attached.

• Include or exclude the module from the Z-Wave system

• Control other Z-Wave enabled devices.

Also, when a controller prompts you to “Send Node ID” or to “Press Button on Unit”, quickly tap the button once

to satisfy those instructions. Also, quickly tapping the button 4 times will give you the same result without changing

the state of the load attached or transmitting to other Z-Wave devices.

• Tapping button toggles the load attached

• Pressing and holding the button will dim or brighten the load attached.

Operation Note

When a light bulb reaches the end of it’s life and burns out, it sometimes creates a momentary short circuit. The

Config Command, adj dim rate, timing, # steps

1 2 3 4 5 6 7

Resumo do Conteúdo

Página 1 - Operation Note

ZDP100 Instructions, Release 2.0090805HomeProby ADVANCED CONTROL TECHNOLOGIES, INC.0677-011Radio Frequency Controlled, 300W, 120 VAC, Plug-In Lamp Mo

Página 2

ZDP100 Instructions, Release 2.0090805HomeProby ADVANCED CONTROL TECHNOLOGIES, INC.0677-012high current that results may cause the dimmer to respond b

Página 3 - • Length: 1 Byte

ZDP100 Instructions, Release 2.0090805HomeProby ADVANCED CONTROL TECHNOLOGIES, INC.0677-013If you associate a Z-Wave device into Group 2, you can turn

Página 4

ZDP100 Instructions, Release 2.0090805HomeProby ADVANCED CONTROL TECHNOLOGIES, INC.0677-014Suspend Group 4• Parameter No: 2• Length: 1 Byte• Val

Página 5 - • Valid Values: 1-255

ZDP100 Instructions, Release 2.0090805HomeProby ADVANCED CONTROL TECHNOLOGIES, INC.0677-0153. One set to control how fast the dim rate is when the dim

Página 6 - Application Sub Version 0

ZDP100 Instructions, Release 2.0090805HomeProby ADVANCED CONTROL TECHNOLOGIES, INC.0677-016COMMAND_CLASS_SWITCH_MULTILEVEL Version 1COMMAND_CLASS_SWIT

Página 7 - WARRANTY

ZDP100 Instructions, Release 2.0090805HomeProby ADVANCED CONTROL TECHNOLOGIES, INC.0677-017Power 120 VAC, 60 HzSignal (Frequency) 908.42 MHzMaximum Lo

Comentários a estes Manuais

Sem comentários

Advanced-control-technologies Specs Instructions ZDP100 (RF CONTROLLED, 300W, 12 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Iluminação Advanced-control-technologies Specs Instructions ZDP100 (RF CONTROLLED, 300W, 12. Advanced Control Technologies Specs Instructions ZDP100 (RF CONTROLLED, 300W, 120 VAC,PLUG-IN LAMP MODULE) User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Iluminação Advanced-control-technologies Specs Instructions ZDP100 (RF CONTROLLED, 300W, 12